Universal 'Flip Plate' holders.
Have you had your front bumper smoothed? And don't want to cable tie a number plate to your grill? Then we have the answer!
These flip plate number plate brackets are designed to allow you to have your front plate on show whilst driving around, but then when you turn up to a show or a meet, you can hide that plate away as if it was never there! No need to carry cable ties and cutters in your glove box anymore!
Theses plate holders are ideally to be fitted into the grill of your front bumper, so please double check ALL measurements before purchasing to be sure its going to fit, as we do not accept returns if fitment hasn't been checked prior to purchasing. If unsure, seek help from a professional.
The kit comes with everything you will need for installation.
These ARE NOT specific to any model of car, they are universal. But should fit on most cars if space allows.
Some cutting of the grill and connecting of wires will be required, so if you are not confident with this, please get a professional to install it for you.
FOR OFF ROAD USE ONLY.
There are 4 options available:
- US/JDM Manual
- UK/Euro Manual
- US/JDM Electric
- UK/Euro Electric
Manual brackets require you to pull the number plate in and out by hand.
Electric brackets will need connecting to the cars battery (or a permanent live feed) as these are controlled remotely with a key fob for flipping the plate in and out. DO NOT PULL THE ELECTRIC VERSION IN AND OUT BY HAND, YOU WILL BREAK IT.
The 2 different backing plates depend on what size plate you're using. UK/Euro is for the normal rectangular plates we use here in the UK and most of Europe (520mm x 111mm).
US is for square US size number plates (12" x 6") but can also be used with Jap size number plates as well (13" x 7")
Kits consists of:
1 x Retractable plate holder
1 x Hardware for fitting
1 x Support bracket
1 x Step by step fitting instructions
1 x Wiring loom (Electric version only)
2 x Key fobs (Electric version only)
Measurements:
US/JDM MANUAL:
- Runner Length: 20cm
- Runner Width: 6cm
- Runner Thickness: 2cm
- Backing Plate Width: 31.5cm
- Backing Plate Height: 16cm
US ELECTRIC:
- Runner Length: 25.5cm
- Runner Width: 6cm widens to 8.5cm at motor.
- Runner Thickness: 2cm
- Backing Plate Width: 31.5cm
- Backing Plate Height: 16cm
UK/Euro MANUAL:
- Runner Length: 20cm
- Runner Width: 6cm
- Runner Thickness: 2cm
- Backing Plate Width: 52cm
- Backing Plate Height: 11cm
UK/Euro ELECTRIC:
- Runner Length: 25.5cm
- Runner Width: 6cm widens to 8.5cm at motor.
- Runner Thickness: 2cm
- Backing Plate Width: 52cm
- Backing Plate Height: 11cm